How to Use a Bissell PowerFresh Steam Mop
To use a Bissell PowerFresh steam mop, fill the tank with water, attach a microfiber pad, select the right steam level, and move slowly across a sealed hard floor. Vacuum or sweep first, use the scrubber for stuck-on grime, and wash the pad after cleaning.
On this page (8 sections)
- What should you do before using a Bissell PowerFresh steam mop?
- How do you fill and heat the mop?
- Which steam setting should you choose?
- How should you move the mop across the floor?
- Which Bissell PowerFresh model fits your cleaning routine?
- How do you use the scrubber and scent features?
- How do you finish and store the mop?
- What mistakes should you avoid?
To use a Bissell PowerFresh steam mop, fill the tank with water, attach a microfiber pad, plug it in, and wait about 30 seconds for steam. Sweep or vacuum first, choose a steam setting, and move the mop slowly across a sealed hard floor.
Steam mops work best when loose dirt is removed before steaming. For a portable Bissell steamer, see how to use a Bissell handheld steam cleaner.
For broader advice on choosing this type of appliance, see our steam cleaner buying guide.
What should you do before using a Bissell PowerFresh steam mop?
Check the floor, clear loose dirt, and attach the correct pad before turning on the mop. PowerFresh models are designed for sealed hard floors, including surfaces such as sealed hardwood, tile, ceramic, granite, and marble when the model's instructions allow them.
Sweep or vacuum crumbs, hair, and grit from the floor. A Best Bissell Vacuum For Carpet can help with nearby carpeted areas, but the steam mop itself is intended for floor steaming.
Inspect the floor for loose boards, damaged finish, open seams, or areas where water could enter. Steam and moisture can affect some surfaces, so follow the floor manufacturer's care guidance before cleaning.
Attach a microfiber pad to the steam head. The pad creates a barrier between the hot steam head and the floor while lifting loosened dirt.
Don't use the mop without the pad required by your model.
How do you fill and heat the mop?
Fill the removable water tank, secure it, and plug the cord into a suitable outlet. The 1940A and 19404 models have a 16 fl oz tank, while the PowerFresh Deluxe 1806 has a 0.56 L tank.
Keep the mop upright while preparing it. Check that the tank is seated correctly before switching to a steam mode.
PowerFresh models in this group heat in about 30 seconds. Wait for the mop to be ready before moving it across the floor.
A warm mop should still be handled carefully because the steam and head can be hot.
The 1940A has a 23 ft power cord, and the Pet model also has a 23 ft cord. Plan the route before cleaning so the cord stays behind you and away from the hot mop head.
For more steam-cleaning guidance, our article on How To Use A Steam Vacuum Cleaner? explains how steam use differs from ordinary vacuuming.
Which steam setting should you choose?
Match the steam level to the floor and the mess. Use a lower setting for a light refresh, and use more steam only when the floor and stuck-on dirt call for it.
The Bissell 1940A offers 3 steam settings for quick refreshes, everyday dirt, and tougher stuck-on spills. This gives you more control when one area needs less moisture than another.
The PowerFresh Deluxe 1806 has High and Low steam modes. Low is the simpler starting point for lighter cleaning, while High suits tougher messes on an approved sealed floor.
The Pet model's information describes 2 steam levels in its title and also refers to 3 steam levels in its feature details. Follow the controls and instructions for your exact 19404 unit rather than guessing from another PowerFresh model.
Start with less steam when you are unsure. Excess moisture can leave a wet floor, so use shorter passes and check the surface as you work.
How should you move the mop across the floor?
Move in slow, overlapping passes, and avoid holding the mop in one spot. The goal is to loosen dirt with steam while the microfiber pad collects it.
Work in small sections so you can see how the floor responds. Push the mop forward and pull it back in steady strokes, keeping the head moving instead of parking it over one mark.
If the pad becomes visibly dirty, stop and replace it with a clean one. A saturated or dirty pad can spread soil rather than collect it.
For sealed tile and grout, use the scrubber feature only on areas that need extra agitation. The 1940A and Pet model include an Easy Scrubber for tough grime, while the Deluxe 1806 has a built-in SpotBoost Brush.
Use light, controlled pressure with the scrubber. Let the brush work on dried-on messes instead of forcing the mop across the surface.
Which Bissell PowerFresh model fits your cleaning routine?
The best choice depends on the steam control, scrubber, scent, and included accessories you want. These models share a corded upright design, a 6.2 lb item weight, and a focus on sealed hard floors.
BISSELL Steam Mop 1940A PowerFresh Floor Steam
The 1940A suits readers who want 3 steam settings, a 23 ft cord, a 16 fl oz removable tank, and a 12 in cleaning path. Its Easy Scrubber is intended for dried-on messes and grout buildup.

A good fit when you want 3 steam settings, a 12 in cleaning path, an Easy Scrubber, and a 23 ft cord for sealed hard floors.
See it on AmazonIt also supports reusable washable microfiber pads. Spring Breeze scent discs can add fragrance while you mop.
Use the settings to match a quick refresh, everyday dirt, or a tougher spill.
BISSELL PowerFresh Pet Steam Mop 19404 Hard
The 19404 suits pet homes that want odor-eliminating scent discs, an Easy Scrubber, and 2 steam levels for sealed hard floors. It includes a microfiber soft pad, a microfiber scrubby pad, 2 odor-eliminating scent discs, and a carpet glider.

A good fit for pet homes that want odor-eliminating scent discs, 2 microfiber pad types, an Easy Scrubber, and a carpet glider.
See it on AmazonIts 16 fl oz tank, swivel steering, 23 ft cord, and about 30-second heat time support routine floor cleaning. Use the scrubby pad for areas that need more agitation, and use the soft pad for gentler everyday passes.
Bissell PowerFresh Deluxe 1806 Steam Mop
The PowerFresh Deluxe 1806 suits readers who want High and Low steam modes, a built-in SpotBoost Brush, and a 0.56 L tank. It is designed for sealed floors such as tile, hardwood, linoleum, ceramic, marble, and granite.

A good fit when you want High and Low steam modes, a SpotBoost Brush, and a 0.56 L tank for sealed hard floors.
See it on AmazonIt heats in about 30 seconds and works with fresh scent discs. The detachable SpotBoost Brush gives you a separate way to work on sticky messes and dried grime.
For more model-specific comparisons, read the bissell powerfresh deluxe steam mop reviews, bissell 1940 powerfresh steam mop review, and Bissell PowerFresh Slim Steam Mop Review.
How do you use the scrubber and scent features?
Use the scrubber only on stuck-on dirt, and treat scent discs as optional. The scrubber adds mechanical action where a normal microfiber pass does not lift the mess easily.
On the 1940A and 19404, flip down the Easy Scrubber over the affected area. On the 1806, use the built-in SpotBoost Brush for sticky or dried grime.
Move over the spot in short strokes, then return to the microfiber pad for the final pass. Remove loosened soil instead of leaving it wet on the floor.
The 1940A supports Spring Breeze scent discs, the Pet model includes odor-eliminating scent discs, and the Deluxe model works with fresh scent discs. Use only the scent option intended for your model.
How do you finish and store the mop?
Turn off and unplug the mop, let it cool, remove the pad, and empty the tank after cleaning. Leaving the pad attached while damp can make storage less tidy and can leave old soil ready for the next session.
Wash reusable microfiber pads according to their care instructions. Let them dry fully before storing them with the mop.
Our guide to best bissell steam mop replacement pads can help when you need additional clean pads.
Wipe away any loose dirt around the head and store the cord safely. Keep the cooled mop upright in a dry place.
Bissell's steam mop care information is the best place to confirm model-specific cleaning and safety instructions.
What mistakes should you avoid?
Avoid steaming an unapproved floor, leaving the head still, using a dirty pad, or adding unapproved cleaning liquid. These shortcuts can create excess moisture or move dirt around instead of removing it.
Don't use a PowerFresh mop on a surface unless it is suitable for steam cleaning and sealed as required. Don't keep steaming one place while waiting for a stain to loosen.
Use the scrubber feature and short passes instead.
Choose the 1940A when you want more steam levels and a 12 in cleaning path. Choose the Pet model when scent discs, 2 pad types, and a carpet glider fit your routine.
Choose the Deluxe 1806 when High and Low modes and a SpotBoost Brush are the better match.
The basic method remains the same: clear loose dirt, attach a clean pad, use the lowest useful steam level, keep the mop moving, and wash the pad after use.
Frequently asked questions
How do you use a Bissell PowerFresh steam mop?
Fill the removable water tank, attach a microfiber pad, plug in the mop, and wait about 30 seconds for heat. Select the steam level that matches the mess, then move the mop across a sealed hard floor.
Use the scrubber only where grime needs extra agitation.
Can you use a Bissell PowerFresh steam mop on hardwood?
Use a PowerFresh steam mop only on sealed hardwood and other sealed hard floors named for the model. Do not assume that every wood floor is sealed.
Check the floor care instructions first, and stop if moisture or heat appears to affect the finish.
Which steam setting should you use on a PowerFresh mop?
Use a lower steam setting for a quick refresh or lighter dirt, then choose a higher setting for tougher messes when your model offers that control. The 1940A has 3 steam settings, while the PowerFresh Deluxe 1806 has High and Low modes.
How do you clean a Bissell PowerFresh mop pad?
Remove the microfiber pad after the mop cools, then wash it according to its care instructions. Let it dry fully before storing or using it again.
A clean pad helps prevent old dirt from spreading across the next floor-cleaning session.
About this guide: Our look at using a Bissell PowerFresh steam mop draws on maker specs, materials and what owners report. See how we research.



