Bissell PowerFresh 1940 Steam Mop Review: Worth It? (November 2026)
The Bissell 1940 PowerFresh works well for routine sealed floor cleaning when you want steam sanitization without harsh chemicals. Choose the Deluxe for High and Low modes and a measuring cup, or the Pet model for odor discs and extra pads.
On this page (10 sections)
- The Bissell 1940 PowerFresh at a glance
- Why this Bissell 1940 PowerFresh steam mop review focuses on sealed floors
- The specs that matter in daily use
- Setup in under five minutes
- How to use the Easy Scrubber for tough messes
- Care for pads, tank and scent discs
- Trade-offs to know before you buy
- Alternatives in the PowerFresh family
- How the 1940 compares for carpet edges and pet homes
- Verdict for the original PowerFresh
The Bissell 1940 PowerFresh is a strong choice for routine sealed floor cleaning in this Bissell 1940 PowerFresh steam mop review. It pairs 30-second heat-up with three steam settings and a flip-down scrubber for grout and dried spills.
Our score weighs specs, features and buyer feedback against what you're shopping for. Bissell says steam kills 99.9% of germs, bacteria and viruses when used as directed, using only water and microfiber pads.
If you want a broader look at categories first, our steam cleaner guide explains how steam mops differ from handheld and canister models. It helps you decide if a mop is the right tool for your floors.
The 1940A is listed under the PowerFresh name for floor steaming, tile cleaning and hard wood floor cleaning. That naming matters because the surface list is narrower than many general cleaners.
The Bissell 1940 PowerFresh at a glance
The 1940A at a glance is simple, corded and focused on sealed hard floors. You get a 12-inch cleaning path, a 16 fluid ounce tank and a 23-foot cord for fewer outlet changes.
BISSELL Steam Mop 1940A PowerFresh Floor Steam: Best for routine sealed floors
- 3 steam settings
- Flip-down Easy Scrubber
- 16 fluid ounce XL removable tank
- 23-foot power cord
- 12-inch cleaning path
The original PowerFresh for sealed hardwood, tile and ceramic, with variable steam and a built-in scrubber for grout and dried-on dirt.
Pros
- Three steam settings for light to tough messes
- Steam kills 99.9% of germs when used as directed
- XL removable tank refills at the sink
- Reusable washable microfiber pads
Cons
- Corded design needs outlet changes on large floors
- Not for unsealed or delicate floors
It weighs 6.2 pounds and measures 11.6 by 7.1 by 28.6 inches. That size makes it easy to store upright in a closet or beside a washer.
The included component is listed as a Steam Head Attachment. The upright form factor keeps the handle and head in one piece for mopping without assembling a separate handheld tool.
The blue PowerFresh color is the main visual marker for the 1940A. Model 1940A and part number 1940 help you match pads and manuals to this exact version.
Who the 1940 suits best
The 1940 suits households with tile kitchens, sealed hardwood hallways and ceramic bathrooms. Those floors benefit from steam that lifts dirt without chemical cleaners.
It also suits renters who want a reusable pad system instead of disposable sheets. You can wash and reuse the microfiber pads for everyday cleaning.
A 6.2-pound upright is light enough to carry between rooms. That weight suits one-story homes and two-story homes where you leave the mop stored on the floor you clean most.
The 12-inch path suits narrow spaces between counters and furniture. You can cover a bathroom or laundry strip without lifting and repositioning the head as often as a narrower mop would.
Why this Bissell 1940 PowerFresh steam mop review focuses on sealed floors
This review focuses on sealed floors because the 1940 is designed for sealed surfaces only. Bissell lists sealed hardwood, tile and ceramic, granite and marble as suitable surfaces.
Steam on an unsealed floor can push moisture into wood or finish. A quick spot test in a hidden area helps you avoid a costly mistake.
Our best Bissell steam mop roundup places this model among other Bissell options. Use that page to compare the 1940 with newer PowerFresh variants.
Sealed hardwood has a protective finish that limits moisture absorption. Tile and ceramic do not absorb water in the same way, but grout lines and edges still need a controlled amount of steam.
Granite and marble are listed as suitable when sealed. That detail is useful in kitchens and bathrooms where stone meets tile and the same mop can cover both.
The surface recommendation is listed simply as Floor. That broad label should not override the narrower sealed floor list in the product description.
The specs that matter in daily use
The specs that matter most are heat time, tank size, cord length and steam levels. The 1940 heats in 30 seconds to 212 degrees Fahrenheit, so short cleanups need no long wait.
The XL removable tank holds 16 fluid ounces and refills at the sink. That limits trips to a faucet compared with small on-board tanks.
The 23-foot cord gives reach across a room. You will still change outlets on very large floors, but less often than with a short cord.
Three steam settings match steam to the mess. Use low for a quick refresh, middle for everyday dirt and high for stuck-on spills.
The 12-inch path covers a wide strip each pass. Swivel steering on related models helps around furniture, but move slowly for even contact.
Corded electric power is not tied to a battery charge. You can clean a large kitchen and bathroom in one session if you manage the cord and outlet.
Setup in under five minutes
Setup is fast because you only fill, attach a pad and plug it in. Start with a clean washable microfiber pad fitted to the steam head.
Fill the removable tank with water and click it back in place. Add a Spring Breeze scent disc in the tray for fragrance while you mop.
Plug in the unit and wait 30 seconds for heat. Select a steam setting and test a light pass on a small area first.
For step-by-step help, follow our guide on how to use Bissell PowerFresh steam mop. It covers pad attachment, steam levels and safe passes for sealed floors.
Check the pad before adding water, as a loose pad folds and changes contact across the 12-inch path. The disc goes in its tray separately, so you can skip it for fragrance-free cleaning.
How to use the Easy Scrubber for tough messes
The Easy Scrubber helps because you flip it down to scrub without extra pressure. It breaks up dried-on messes and grout buildup in tile lines.
Use the scrubber on grout lines and sticky spots, then lift it and mop over the area with steam. That two-step approach avoids pressing hard with the mop head.
For general steam methods, our guide on How To Use A Steam Vacuum Cleaner? explains slow passes and surface checks. Those habits apply to the 1940 as well.
Grout buildup is often in the lines rather than on the tile face. The scrubber targets that pattern by adding a brushing action at the head.
Dried-on kitchen spills respond to the same two-step method. Flip the scrubber down for the spot, raise it, then pass the mop head over the loosened area.
The feature description says no extra pressure is required. That matters for sealed hardwood, where pressing hard can risk the finish even when steam is appropriate.
Matching scrubber use to steam settings
Low steam with the scrubber suits a light refresh with a sticky area. Medium steam suits everyday dirt that has dried between cleanings.
High steam suits tough stuck-on spills and grout. Use it in short passes and check the floor as you go, so you do not leave excess moisture behind.
Scent discs can be added for the final pass. The Spring Breeze scent is for freshness while mopping, not for extra scrubbing power.
Care for pads, tank and scent discs
Care is simple when you wash pads often and empty the tank after use. Reusable microfiber pads need regular laundering to keep steam contact even.
Remove the pad after the mop cools, wash it per the pad directions and dry it fully before reuse. Dirty pads leave residue and reduce sanitizing contact.
Empty leftover water and let the tank air dry before storage. Replace scent discs when fragrance fades and store spares dry.
Do not add cleaning chemicals to the tank. Bissell designs steam cleaning around water alone, and extra products may harm the unit.
Keep a spare clean pad ready for the next pass. Store scent discs dry and separate from pads to keep fragrance clean.
Trade-offs to know before you buy
The main trade-off is corded power versus freedom of movement. A 23-foot cord helps, but you cannot move as freely as with a cordless model.
Another trade-off is floor type. The 1940 is excellent on sealed tile and sealed hardwood, but it is not a choice for unsealed wood, waxed floors or delicate surfaces.
Scent discs are a preference, not a necessity. Some buyers love the Spring Breeze scent, while others prefer fragrance-free cleaning.
Our score reflects those limits. The 1940 scores high for its intended floors, while buyers with unsealed floors should look elsewhere.
The 16 fluid ounce tank is XL for a steam mop, but it is still finite. Large open floors may need a refill mid-clean, especially on the highest steam setting.
The 6.2-pound weight is manageable, but storage height is 28.6 inches. Closet depth and door clearance are worth checking before you buy.
Three steam settings add control, but they also require a choice for each mess. The Deluxe model simplifies that choice to High and Low, which some buyers prefer.
Alternatives in the PowerFresh family
The alternatives below help you choose within the family. Each one keeps the PowerFresh idea, but changes the brush, scent or pad bundle.
Bissell PowerFresh Deluxe 1806 Steam Mop
The Deluxe 1806 suits buyers who want High and Low steam instead of three settings. It heats in 30 seconds and includes a SpotBoost brush for sticky messes.

SpotBoost brush and High and Low modes for quick spot cleaning on sealed floors.
See it on AmazonIt includes a measuring cup for filling and optional Spring Breeze discs for scent. Compare it in our Bissell PowerFresh Deluxe steam mop reviews if you prefer simpler controls.
The Deluxe tank is listed as 0.56 liters. The measuring cup is a practical addition for owners who want a repeatable fill level.
Its dimensions are listed as 30 by 8 by 6 inches. That shape differs from the 1940A and may fit some storage spaces better.
BISSELL PowerFresh Pet Steam Mop 19404 Hard
The Pet 19404 suits pet homes because it adds odor-eliminating scent discs and extra pads. It includes a soft pad, a scrubby pad, two scent discs and a carpet glider.

Odor discs, two pad types and a carpet glider for pet messes on sealed floors.
See it on AmazonIt also offers swivel steering, a 23-foot cord and 30-second readiness. For a slimmer take, see Bissell PowerFresh Slim steam mop reviews.
The Pet model lists a 16 fluid ounce tank as well. That shared capacity makes the 1940 and Pet models similar for refill frequency.
Pad variety is the key difference for pet homes. A soft pad and a scrubby pad let you choose contact for general mopping or tougher spots.
How the 1940 compares for carpet edges and pet homes
The 1940 compares well for edges and transitions on sealed floors. The scrubber helps along grout lines, and slow passes let the head follow baseboards.
If carpet cleaning is your main need, a steam mop is not a substitute for a carpet cleaner. Our Best Bissell Vacuum For Carpet guide helps you choose a vacuum for carpeted rooms.
For Deluxe pad options, our guide to best Bissell PowerFresh Deluxe steam mop pads 1806 explains pad choices. Check your model number before ordering pads.
Pet hair and tracked dirt gather at door thresholds. The Easy Scrubber can loosen that line before a steam pass lifts it.
The Pet model adds a carpet glider for edges. The 1940A does not list one, so carpet edge use is more limited.
Verdict for the original PowerFresh
The verdict is clear: pick the 1940 for routine sealed floor cleaning with three steam levels. It is fast to heat, easy to refill and built for tile, ceramic and sealed hardwood.
Pick the Deluxe 1806 if you want simpler High and Low control and a SpotBoost brush. Pick the Pet 19404 if odor discs and extra pads matter more to you.
For your next step, read how to use Bissell PowerFresh steam mop before your first clean. That guide will help you get even results on sealed floors from day one.
The 1940A remains the most direct choice when you want three settings and a flip-down scrubber. Its 30-second heat-up and 23-foot cord support quick routine passes.
Check your floor seal before the first use. That one check protects the main benefit of the mop, which is steam cleaning without harsh chemicals on suitable sealed surfaces.
Frequently asked questions
Is the Bissell 1940 PowerFresh good for routine sealed floor cleaning?
Yes, it is made for sealed hardwood, tile and ceramic and offers three steam settings for light refreshes and tougher messes. Use the lower setting for quick passes and higher settings for grout and dried-on spills.
Always check that your floor is sealed before steaming.
How long does the Bissell 1940 take to heat up?
The 1940 heats in 30 seconds. That short wait makes it practical for a quick kitchen or bathroom pass.
Fill the tank, attach a pad and let it warm before you start moving.
What floors can the Bissell PowerFresh 1940 clean?
Bissell designs it for sealed hard floors such as sealed hardwood, tile and ceramic, granite and marble. Do not use it on unsealed floors, unglazed tile or floors where excess moisture could cause damage.
When in doubt, test a small hidden area first.
Does the Bissell 1940 come with scent discs?
The 1940 adds Spring Breeze scent discs while you mop. The scent is optional and comes from the disc, not from chemicals added to the water.
If you prefer no fragrance, use the mop without a disc.
About this guide: Our look at Bissell 1940 PowerFresh steam mop draws on maker specs, materials and what owners report. See how we research.



