9 Best Vacuum Replacement Filters (November 2026)
The best vacuum replacement filters include the Anewise Filter Replacement for Shark Navigator Lift for Shark Navigator Lift-Away, the Colorfullife NV501 Vacuum Filter Replacement for Shark for Shark Rotator NV500 series, and the Lemige Ball Animal Filter Replacements for Dyson for Dyson Ball Animal uprights.
On this page (6 sections)
- Which vacuum replacement filters are best for each model family?
- How do you match a vacuum filter replacement to your vacuum?
- What should you check before buying vacuum filters replacement?
- Are HEPA vacuum replacement filters worth choosing?
- How should you install and care for vacuum filter replacement parts?
- Which vacuum replacement filter should you choose?
The best vacuum replacement filters are model-specific washable kits. They cover Shark Navigator, Shark Rotator, Dyson Ball and Dyson V7 or V8 vacuums.
Match your vacuum model and replacement part number first, then choose the set with the right mix of HEPA, foam and felt filters.
Model fit matters more than brand alone because similar looking vacuums often use different filter shapes. A kit that fits one Shark family can sit wrong in another, and the same is true across Dyson upright and cordless ranges.
For Kenmore 116 models, see replacement filters for Kenmore 116.
This guide compares filters by fit, filter type, pack size and care instructions. Larger sets help when a vacuum is used often and filters need time to dry, while smaller sets suit a single planned change.
If you need a different Shark model, compare our guide to the best shark vacuum filter replacement. For other brands, see the best bissell vacuum filter replacement and best eureka vacuum filter replacement guides.
Washable foam and felt filters still need a full air dry before they go back, so a spare set can be practical for busy homes. Use the model list and part number together as your final check, especially where names such as NV350, NV500 and NV650 sound close but use different parts.
Our picks at a glance
-
1
Best for Shark Navigator Lift-AwayAnewise Filter Replacement for Shark Navigator Lift
9.7/10 our score
See it on Amazon -
2
Best for Shark Rotator NV500 seriesColorfullife NV501 Vacuum Filter Replacement for Shark
9.7/10 our score
See it on Amazon -
3
Best for Dyson Ball Animal uprightsLemige Ball Animal Filter Replacements for Dyson
9.7/10 our score
See it on Amazon
- 4
Check itLINNIW 4+2 Pack Filters for Shark Vacuum
Best for a full Shark Navigator spare set - 5
Check itHechuang Filter for Dyson V8 Filter Replacement
Best for Dyson V7 and V8 cordless vacuums - 6
Check itDttery HV300 HV301 HV302 HV310 Vacuum Filter
Best for Shark Rocket corded sticks - 7
Check itColorfullife NV752 Vacuum Filter Replacement for Shark
Best for Shark Powered Lift-Away models - 8
Check itColorfullife Vacuum Filter Replacement for Shark Navigator
Best for Shark NV150 and ZU60 - 9
Check itColorfullife Vacuum Filter Replacement for Shark Navigator
Best for Shark ZU560 and UV730
Which vacuum replacement filters are best for each model family?
Anewise is the strongest match for many Shark Navigator Lift-Away models, while Lemige covers Dyson Ball Animal uprights and Hechuang serves Dyson V7 and V8 cordless vacuums. The remaining picks target narrower Shark families, so your model number should decide the shortlist.
Our score weighs specs, features and buyer feedback against what you're shopping for. The products are ordered from highest score to lowest score.
Anewise Filter Replacement for Shark Navigator Lift: Best for Shark Navigator Lift-Away
- 1 HEPA filter
- 2 pre-felt filters
- Fits Shark Navigator models
- Washable and reusable
This 3-piece kit suits many Shark Navigator Lift-Away models and includes a HEPA filter plus foam and felt filters. It is a strong choice when your vacuum matches the XFF350 or XHF350 parts.
Pros
- Broad Navigator model coverage
- Washable and reusable
- Simple tool-free replacement
Cons
- Does not fit every Shark upright
- Model matching is essential
Anewise is the best starting point for Shark Navigator Lift-Away owners whose vacuum matches one of the listed ZU503AMZ, NV350 through NV391, UV440 or UV540 models. The kit includes 1 HEPA filter and 2 pre-felt filters, giving you the main filter types used by those compatible machines.
The filters use felt, foam and polypropylene. They are washable and reusable, so you can rinse them with clean water and let them air dry before putting them back.
This kit replaces the XFF350 and XHF350 parts. That part-number match is useful when the vacuum label is unclear, but you should still compare the full model number.
Anewise specifically excludes models such as the Shark UV650, UV725, ZU561, ZU560, NV70, ZD402 and UV730.
Choose Anewise when you want a compact 3-piece kit for a broad Navigator Lift-Away model group. It is less suitable when your Shark belongs to a later ZU560, NV650 or NV750 family.
Colorfullife NV501 Vacuum Filter Replacement for Shark: Best for Shark Rotator NV500 series
- 2 + 4 filter set
- Foam, felt and polypropylene
- Reusable design
- Fits NV500 series models
This Colorfullife kit is aimed at Shark Rotator NV500-series vacuums. It gives buyers a larger replacement set, but it is not for the NV650 or NV750 series.
Pros
- Broad NV500-series coverage
- Reusable materials
- Larger replacement set
Cons
- Not for NV650 or NV750 series
- Long model list needs careful checking
Colorfullife's NV501 replacement is designed for the Shark Rotator NV500 series, including NV500, NV501, NV502, NV505, NV510, NV520, NV552 and UV560 models. It fits the XFF500 and XHF500 parts and uses foam, felt and polypropylene.
The kit is reusable and gives buyers a larger replacement set than a basic single-filter purchase. That can help if you want spare filters available while another set is drying.
Foam and felt do different jobs in the vacuum, so having both types on hand makes routine care easier. You can rotate a clean set in while the used set is washed and left to dry fully.
The key limitation is the model family. This filter is not for Shark NV650 or NV750 series vacuums, so the similar names should not be treated as interchangeable.
Those later Rotator families use a different part family, so a close name is not a safe match. Checking the label on the vacuum body is quicker than measuring a filter and hoping it will fit.
Pick it when your vacuum is an NV500-series Rotator or one of the other listed models. If your machine is an NV650, NV750, NV755, UV795, NV680 or NV800 series, choose a filter made for that family instead.
This is a good fit for households that vacuum often and prefer not to wait for one set to dry. It is less useful if your model is only one number away but sits in the excluded group.
Lemige Ball Animal Filter Replacements for Dyson: Best for Dyson Ball Animal uprights
- 2 post-motor HEPA filters
- 2 pre-motor filters
- Fits Dyson Ball Animal models
- Washable and reusable
Lemige covers several Dyson Ball Animal, Ball Allergy, Ball Complete and Ball Multi Floor models. The 4-piece set separates pre-motor and post-motor filtration for compatible upright vacuums.
Pros
- Covers Dyson Ball Animal 2 and 3 models
- Includes pre and post filters
- Washable and reusable
Cons
- Not for Dyson DC40 or DC50
- Several Ball variants require model matching
Lemige is the best fit for many Dyson Ball Animal upright vacuums, including DC41, DC65, DC66, UP13, UP20 and UP30 models. It also covers several Ball Animal, Ball Allergy, Ball Complete, Ball Multi Floor and Ball Total Clean versions.
The set contains 2 post-motor HEPA filters and 2 pre-motor filters. The HEPA filters measure 6.88 x 6.88 x 1.47 in, and the pre-filters are identified separately for the compatible Dyson designs.
Pre-motor and post-motor pieces should not be swapped, because each one has its own place in the airflow path. Keeping them labelled as you remove the old set makes the replacement step straightforward.
Lemige describes the filters as washable and reusable. Its compatibility includes Dyson Ball Animal 2 and Ball Animal 3 models, but not DC40 or DC50 filters.
That exclusion matters since Ball models share a family name but not a single filter design. A DC40 or DC50 owner should look for a set made for that exact model instead.
The product data also identifies comparisons to parts 920769-01, 920769-03 and 920640-01. Those part numbers are a useful cross check if your machine label is worn or hard to read.
Choose this kit when you need both pre-motor and post-motor replacements for a compatible Dyson Ball upright. Confirm the exact Dyson model before ordering because Ball names cover several different filter shapes.
LINNIW 4+2 Pack Filters for Shark Vacuum: Best for a full Shark Navigator spare set
- 4 foam filters
- 4 felt filters
- 2 HEPA filters
- 90-day warranty
LINNIW provides a 10-piece replacement set for many Shark Navigator Lift-Away models. The larger pack makes sense when you want spare foam, felt and HEPA filters ready for future changes.
Pros
- Largest Shark Navigator set here
- Wide model coverage
- Washable and reusable
Cons
- Requires exact Navigator model match
- More pieces than some buyers need
LINNIW is the strongest choice when you want a full replacement set for many Shark Navigator Lift-Away models. It includes 4 foam filters, 4 felt filters and 2 HEPA filters, for 10 pieces in total.
The filters fit a long list of models from the NV350 through NV391 families, along with CU500 and CU512 series, UV440, UV540 and ZU503AMZ. They compare to the XFF350 and XHF350 parts.
That part match is the key detail to verify against your current filters. If your vacuum needs XFF350 or XHF350, this set is aimed at you, but a different Shark family will need a different kit.
The foam filters have a stated 60 PPI density, and the felt filters have a textured surface. LINNIW describes the set as washable and reusable, so clean filters with water and let them dry completely before use.
A thick felt layer and a foam layer are normally used together, so replacing both at the same time keeps the setup consistent. Rotating four of each gives you room to wash one set while another stays in place.
A 90-day warranty is included in the product data. Pick LINNIW when you want multiple replacement cycles for a compatible Navigator.
If you only need one small set, Anewise uses fewer pieces and may be simpler.
Hechuang Filter for Dyson V8 Filter Replacement: Best for Dyson V7 and V8 cordless vacuums
- 3 post filters
- 3 pre filters
- Cleaning brush included
- Washable and reusable
Hechuang is made for Dyson V7 and V8 cordless models, including Animal and Absolute versions. Its 6-filter set and brush suit buyers who want replacements for repeated filter care.
Pros
- Fits Dyson V7 and V8
- Includes pre and post filters
- Brush included
Cons
- Not for Dyson V6
- Cordless model matching is required
Hechuang is made for Dyson V7 and V8 cordless vacuums, including V7 Animal, V7 Absolute, V8 Animal and V8 Absolute versions. It also lists SV10, SV11, S25 and SV37 models and replaces parts 965661-01 and 967478-01.
The set contains 3 post filters, 3 pre-filters and 1 brush. The filters use H13 HEPA material, and the product data describes them as washable and reusable.
Having three of each type suits a cordless vacuum used in short, frequent bursts. You can swap in a clean filter and wash the used one without taking the vacuum out of use for long.
The included brush is handy for clearing loose dust from filter surfaces before you decide whether washing is needed. It does not replace a proper wash when the filter looks clogged.
The main exclusion is Dyson V6. A V6 filter should not be forced into a V7 or V8 body, and the reverse also applies, so the listed part numbers are a safer check than shape alone.
Twist the old filter off, insert the replacement and lock it clockwise after the filter is fully dry. A damp filter can sit unevenly and may affect how the vacuum closes.
Choose Hechuang when you need several pre and post filters for a Dyson V7 or V8. It is not the right choice for a V6 or for Dyson upright models such as the Ball Animal range.
Dttery HV300 HV301 HV302 HV310 Vacuum Filter: Best for Shark Rocket corded sticks
- 3 foam filters
- 3 pre-motor felt filters
- 3 post-motor felt filters
- Washable and reusable
Dttery gives compatible Shark Rocket owners 3 complete filter kits, with foam, pre-motor felt and post-motor felt in each kit. It does not fit Shark Rocket HV320 or HV380 series.
Pros
- Three complete replacement kits
- Covers many Rocket models
- Washable and reusable
Cons
- Not for HV320 or HV380
- Small felt filters are packed inside each kit
Dttery targets Shark Rocket corded stick and handheld models, including CS100, CS110, HV200, HV251, HV290, HV292, HV293, HV294, HV300, HV301, HV302, HV303, HV305, HV307, HV308, HV310 and UV450.
Each of the 3 inner kits contains 1 foam filter, 1 pre-motor felt filter and 1 post-motor felt filter. That gives you 9 filters in total, and the set replaces Shark part XFFV300.
Breaking the set into three complete kits makes rotation easy. Each kit has the foam and both felt positions needed for a full change, so you do not have to keep track of loose pieces.
The felt filters are packed inside the same inner bags as the foam filters. Open each inner package before deciding that a filter is missing.
That packaging is easy to miss at first glance because the felt pieces are smaller and thinner. Tipping each inner bag out and checking its contents will save a false call about a short pack.
Dttery says the filters can be rinsed with water and should air dry for at least 24 hours.
That waiting time is worth planning for if the Rocket is your main vacuum. Keeping a second kit ready means the machine stays usable while the washed set dries.
This kit suits Rocket owners who want three complete filter cycles. It does not fit Shark Rocket HV320 or HV380 series vacuums, so check the model number first.
Colorfullife NV752 Vacuum Filter Replacement for Shark: Best for Shark Powered Lift-Away models
- 4 foam filters
- 4 felt filters
- 2 H13 HEPA filters
- Washable and reusable
This Colorfullife kit covers Shark Powered Lift-Away, DuoClean and selected APEX upright models. The 10-piece set suits households that want several foam, felt and HEPA replacements.
Pros
- Large replacement set
- Covers several Shark families
- Includes H13 HEPA filters
Cons
- Compatibility spans many similar models
- Part-number checking is important
Colorfullife's NV752 kit is made for Shark Powered Lift-Away, DuoClean and selected APEX upright models. Compatibility includes NV650, NV651, NV652, NV750, NV751, NV752, NV831, NV835, AX950, AX951, AX952, ZU632 and several AZ1000-series models.
The set includes 4 foam filters, 4 felt filters and 2 H13 HEPA filters. It compares to Shark parts XFF650 and XHF650, separate from the XFF350 and XHF350 kits used by other Navigator families.
The foam filters have a stated 60 PPI density, and the felt filters have a textured surface. All filters are washable and reusable.
Colorfullife recommends replacing foam and felt filters every 2 to 3 months based on service conditions. Households with pets or frequent use may fall toward the shorter end of that window.
A spare set helps because washed filters need time to dry before they can go back. Choose this kit only when your Shark uses the NV650 or NV750 family parts, and compare the model and part number before buying.
Colorfullife Vacuum Filter Replacement for Shark Navigator: Best for Shark NV150 and ZU60
- 2 H12 filters
- 6 foam filters
- 6 felt filters
- Washable and reusable
This 14-piece Colorfullife set is made for Shark Navigator and Zero-M models such as the NV150, ZU60 and ZU102. It works best when your vacuum uses parts 1238FT60 and 1239FT60.
Pros
- Large supply of foam and felt filters
- Fits several NV and ZU models
- Washable and reusable
Cons
- Narrower model family than Navigator XFF350 kits
- H12 and H13 filter labels are not interchangeable
This Colorfullife set is made for Shark NV150, NV151, NV251, NV255, ZU60, ZU62 and ZU102 models. It replaces parts 1238FT60 and 1239FT60, making those numbers useful when checking your current filters.
The pack contains 2 H12 filters, 6 foam filters and 6 felt filters. The foam filters have a stated 60 PPI density, and the felt filters have a textured surface.
The larger count of foam and felt pieces is the main draw of this set. Six of each gives plenty of room for rotation, especially if you wash filters rather than replace them at every clean.
The filters are washable and reusable. Colorfullife recommends replacing the foam and felt filters every 3 months and the other filter every 6 months, with the schedule adjusted to your vacuum's use.
Having different intervals for different filter types is common, so it helps to note which piece you changed and when. A simple note on the pack can keep the rotation on track.
H12 and H13 labels are not interchangeable, so do not assume a filter from another kit will work here. The part numbers 1238FT60 and 1239FT60 should guide the match.
Pick this set when you need a large supply for a Shark Navigator Zero-M or related NV150 family vacuum. It is not a general Shark kit, so a different Navigator model may need another part number.
Colorfullife Vacuum Filter Replacement for Shark Navigator: Best for Shark ZU560 and UV730
- 2 post filters
- 4 foam and felt filters
- Washable and reusable
- Fits ZU560 and related models
This Colorfullife kit targets Shark ZU560, ZU561, ZU570, ZU571, ZU572 and related upright models. It combines post filters with foam and felt filters for a complete replacement cycle.
Pros
- Covers several ZU560-family models
- Includes post, foam and felt filters
- Washable and reusable
Cons
- Not for every Shark Navigator
- The exact model should be checked near the dust cup
This Colorfullife kit serves Shark ZU560, ZU561, ZU570, ZU571 and ZU572 models, along with related CU530, UV650, UV725, UV730, ZD400 and ZD402 vacuums. It compares to XFFK560, XHEPA560, XFFKZD400 and XHFZD400 parts.
The set includes 2 post filters and 4 foam and felt filters, for 6 pieces. The foam filters have a stated 60 PPI density, and the felt filters use a textured surface.
That mix covers the main filter positions for this vacuum family in one pack. Two post filters give you a spare, while the foam and felt pieces suit routine washing and rotation.
The filters are washable and reusable. Colorfullife recommends changing the filter every 2–3 months or as needed, and the model number is usually located near the dust cup on the back of the vacuum.
Checking that label is a quick way to avoid a mistake, since Shark model numbers in this group differ by only a few digits. A ZU561 and a ZU560 look close in print but should still be confirmed before ordering.
The four part numbers listed also help if the label is faded. Compare the part on your old filter with XFFK560, XHEPA560, XFFKZD400 or XHFZD400 as applicable.
Choose this kit for the ZU560 and ZU561 family rather than an NV350 or NV500 model. Its model coverage is useful, but the similar Shark names make a careful label check necessary.
How do you match a vacuum filter replacement to your vacuum?
Match the model number first, then confirm the filter part number and filter positions. A replacement that fits one Shark Navigator family may not fit another, even if both use the Navigator name.
Start with the label on your vacuum rather than the name in a listing. The model number is usually near the dust cup, on the body, or in the manual.
Compare that number with the compatible models above, then check whether the filter replaces a named part such as XFF350, XHF350, XFF500, XHF500, XFFV300, XFF650 or XHF650. Part numbers act as a second check when model names are close, as NV350 and NV650 belong to different filter families.
Note what is already in the vacuum, including whether you have foam, felt and a HEPA style filter, and where each one sits. Pre-motor, post-motor, foam and felt pieces are not interchangeable, even when they come in one box.
Pay attention to exclusions. Anewise excludes Shark UV650 and UV725, Colorfullife's NV501 filter excludes NV650 and NV750, Dttery excludes HV320 and HV380, and Hechuang excludes Dyson V6.
The same process applies to Dyson filters, as Ball Animal and V7 or V8 cordless filters are separate groups. Matching the exact model, such as DC41, DC65, UP20, V7 or V8, keeps you in the right group.
Take a photo of the label if it is hard to read in poor light.
What should you check before buying vacuum filters replacement?
Check the filter type, number of pieces and cleaning instructions before choosing a kit. A set with foam, felt and HEPA filters is useful only when your vacuum uses all of those filter positions.
A larger pack can lower how often you need to reorder, but it may include more filters than you need. The LINNIW, Colorfullife NV752 and Colorfullife NV150-family kits are aimed at buyers who want multiple replacement cycles.
Washable and reusable does not mean a filter can go straight back into the vacuum while damp. Rinse only when the filter instructions allow it, squeeze or shake away excess water without damaging the filter, and let it air dry completely.
For a step-by-step care routine, read How to Clean a Vacuum Filter?. Cleaning the filter can help maintain airflow, but a torn, misshapen or persistently clogged filter should be replaced.
Are HEPA vacuum replacement filters worth choosing?
HEPA vacuum replacement filters are useful when your vacuum is designed for them and the replacement matches the correct model. The products here use different filter descriptions, including HEPA, H12 and H13, so the vacuum's required filter type should guide the choice.
Anewise includes 1 HEPA filter for several Shark Navigator models. LINNIW includes 2 HEPA filters, while Colorfullife's NV752 kit includes 2 H13 HEPA filters.
Hechuang uses H13 HEPA material for compatible Dyson V7 and V8 vacuums.
For a plain explanation of the term, read What Is a HEPA Filter in a Vacuum?. You can also compare What Is A Hepa Filter In A Vacuum Cleaner? when deciding whether your machine needs a HEPA replacement.
Do not add a HEPA filter to a vacuum unless the shape and model fit are confirmed. A filter that sits incorrectly can prevent the vacuum from closing or allow air to bypass the intended filter path.
How should you install and care for vacuum filter replacement parts?
Install each replacement in the same position as the filter it replaces, using the model instructions when available. Keep pre-motor, post-motor, foam, felt and HEPA filters in their intended locations.
Remove the old filters one at a time and lay the replacements beside them. That habit helps you remember which shape goes where, especially when foam and felt pieces look similar.
Wash reusable filters with clean water when the product allows it. Hechuang recommends twisting off the old Dyson filter, inserting the replacement and locking it clockwise.
For that Dyson design, the twist should feel smooth once the new filter is seated. If it resists, lift the filter out and check its position rather than forcing the turn.
Dttery recommends rinsing until the water runs clear and air drying for at least 24 hours. Let filters air dry in a ventilated spot away from direct heat, as heat can change the shape of foam and felt.
Shake off excess water gently after washing, but do not wring foam or felt. Twisting can tear the material or compress it so it no longer fits the housing.
Keep a spare set available if your vacuum is used often, so one set can dry fully while another is ready. Never install a damp filter.
Replace filters on the schedule that matches your model and use, often every 2 to 3 months. Adjust that schedule for heavy pet hair, dust or frequent cleaning, and replace a filter that stays clogged, torn or misshapen after washing.
Which vacuum replacement filter should you choose?
The exact model and part number should decide your final pick, because every kit in this guide is built for a specific vacuum family. Start with the label on your machine, then match it to the filters listed here.
Anewise suits many Shark Navigator Lift-Away models in the XFF350 and XHF350 group, including NV350 through NV391 plus UV440 and UV540. It is a compact 3-piece choice for owners who need the main HEPA, foam and felt positions covered.
Colorfullife NV501 is the pick for Shark Rotator NV500-series vacuums that use XFF500 and XHF500 parts. It does not fit NV650, NV750, NV755, UV795, NV680 or NV800 models.
Lemige covers Dyson Ball Animal uprights such as DC41, DC65, DC66, UP13, UP20 and UP30, including Ball Animal 2 and Ball Animal 3 versions. It brings pre-motor and post-motor pieces together, but it is not for DC40 or DC50.
LINNIW is the larger Shark Navigator option, with 10 pieces for the same XFF350 and XHF350 families. Choose it when you want several replacement cycles ready, rather than a single small set.
Hechuang is made for Dyson V7 and V8 cordless vacuums, including Animal and Absolute versions, and it is not for V6. Dttery fits Shark Rocket corded stick models that use part XFFV300, but not HV320 or HV380.
For later Shark families, Colorfullife NV752 covers Powered Lift-Away, DuoClean and selected APEX models using XFF650 and XHF650. Colorfullife NV150 fits NV150, ZU60 and related Zero-M models, while Colorfullife ZU560 fits ZU560, ZU561 and nearby uprights.
Our top 3 picks at a glance
-
1
Best for Shark Navigator Lift-Away
Anewise Filter Replacement for Shark Navigator Lift
9.7/10 our score
See it on Amazon -
2
Best for Shark Rotator NV500 series
Colorfullife NV501 Vacuum Filter Replacement for Shark
9.7/10 our score
See it on Amazon -
3
Best for Dyson Ball Animal uprights
Lemige Ball Animal Filter Replacements for Dyson
9.7/10 our score
See it on Amazon
Frequently asked questions
How do I choose the best vacuum replacement filters?
Match the vacuum's exact model number and the replacement part number before choosing a filter. Then compare the filter types, number of pieces and care instructions.
A large pack is useful for regular maintenance, but compatibility matters more than the number of filters included.
Are vacuum filters replacement parts washable?
Many replacement filters in this guide are washable and reusable, including foam, felt and some HEPA filter designs. Rinse them with clean water when the product instructions allow it, then let every filter air dry completely before reinstalling it.
How often should you replace a vacuum filter?
The right schedule depends on the vacuum, filter type and cleaning conditions. Several products here recommend replacement or filter changes every 2–3 months, while other kits give different intervals.
Check the model instructions and replace filters sooner if they remain damaged or clogged after cleaning.
Can I use a Shark filter in a different Shark vacuum?
No. Shark filters are made for specific model families and part numbers.
A Navigator NV350 filter may not fit an NV650 or NV750, even when the vacuums look similar.
Confirm the model number and compare the replacement part before ordering.
What is the difference between foam, felt and HEPA vacuum filters?
Foam and felt filters are commonly used around the motor, while HEPA filters are used for finer filtration in compatible vacuum designs. The correct combination depends on the vacuum model.
Replace each filter type with the matching shape and part number.
